Heavy Vehicle Lighting System Trainer
The HV-1918-1S Single-sided Heavy Vehicle Lighting System Trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities. A Moduponent® consists of a clear Plexiglas sheet with components, wiring and socket test points attached. The Moduponent® is attached to the trainer using disconnect fasteners which allows easy adaptation and configuration for different applications.
Educational Advantages
- The HV-1918-1S is a complete heavy vehicle lighting system with front, rear, brake, clearance, turn/hazard and backup lights with a 7 wire connector;
- Meets CSA/UL safety requirements;
- Most complete heavy vehicle lighting and accessory circuit trainer available;
- Modular LED lights (except headlights) that match on-highway truck components;
- Built to train up to four students at a time.
STANDARD MODELS
Features
- Available single sided (52929) or double sided (52930)
- Manual fault box with 2 faults for the following Front Lights Moduponent® circuits:
– Left headlamp ground circuit,
– Left/right headlamp ground circuits; - Manual fault box with 10 faults for the following Lighting Switch Controls Moduponent® circuits:
– Headlight switch (2),
– Signal flasher (2),
– Backup light switch,
– Stop light switch,
– Ignition switch,
– Right turn signal indicator,
– Relay No. 3,
– Relay No. 4.
Contents:
- HV-1918-01 Front Lights Moduponent® (52924) (1)
- HV-1918-02 Lighting Switch Controls Moduponent® (52925) (1)
- HV-1918-03 Rear Lights Moduponent®(52926) (1)
- HV-1918-08 5-Clearance Lights Kit (52928) (1)
- HV-1918-12A Set of 89 jumper leads (52557) (1)
- Stand with lockable storage box (52438) (1)
- 12VDC Power Supply (52439) (1)
Optional Equipment
- HV-1918-1U Upgrade Kit (#52929-1) — This upgrade kit converts a single sided trainer to a double side. Each kit contains:
- – HV-1918-01 Front Lights Moduponent®(1)
– HV-1918-02 Control Panel Moduponent® (1)
– HV-1918-03 Rear Lights with red turn/brake lights Modupnent® (1)
– HV-1918-12A Set of 89 jumper wires (1)
– 12VDC Power Supply (1)
Converts a single sided trainer to a double side
Manual fault box with 2 faults for the following Front Lights Moduponent® circuits:
– Left headlamp ground circuit
– Left/right headlamp ground circuits
Manual fault box with 10 faults for the following Lighting Switch Controls Moduponent® circuits:
– Headlight switch (2)
– Signal flasher (2)
– Backup light switch
– Stop light switch
– Ignition switch
– Right turn signal indicator
– Relay No. 3
– Relay No. 4.
- HV-1918-01 Front Lights Moduponent® (52924) (1)
- HV-1918-02 Lighting Switch Controls Moduponent® (52925) (1)
- HV-1918-03 Rear Lights Moduponent®(52926) (1)
- HV-1918-08 5-Clearance Lights Kit (52928) (1)
- HV-1918-12A Set of 89 jumper leads (52557) (1)
- Stand with lockable storage box (52438) (1)
- 12VDC Power Supply (52439) (1)
