Combination Heavy Truck & Multiplexed Lighting System Trainer

SKU: HV-MP-1918_53129

The HV-MP-1918 trainer combines an HV-1918-1S Heavy Vehicle Lighting Systems Trainer on one side, with an MP-1918-1S Heavy Vehicle Multiplex Trainer on the opposite side.  The trainer has two completely separate heavy vehicle lighting systems.  The trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities.  A Moduponent® consists of a clear Plexiglas sheet with components, wiring and socket test points attached.  The Moduponent® is attached to the trainer frame using quick connect fasteners which allows easy removal and attachment for different configurations.

Spec Sheet


  • The MP-1918-1S Trainer uses SAE J1929 communications protocol to operate a 4 module CAN Bus network , which includes both a DLC and a Deutch Connector;
  • The trainer demonstrates common multiplexing circuit controls via a high speed CAN Bus network;
  • Students connect modules and components using included jumper wires;
  • The MP-1918-1S can be used as a CAN Bus demonstration trainer, or, using the included comprehensive student lab manual, as a CAN Bus training course;
  • Built-in fault insertion can be placed in the trainer for diagnostic training or student evaluation;
  • CAN Bus diagnostics can be thought using a DMM and DSO to look at Bus resistance, wake up signal and high speed information packets;
  • The HV-1918-1S is a complete heavy vehicle lighting system with front, rear, brake, clearance, turn/hazard and backup lights with a 7 wire connector;
  • Meets CSA/UL safety requirements;
  • Most complete heavy vehicle lighting and accessory circuit trainer available;
  • Modular LED lights (except headlights) that match on-highway truck components;
  • Built to train up to four students at a time.



1- HV-1918-01 Front Lights Moduponent® (52924)
1- HV-1918-02 Lighting Switch Controls Moduponent® (52925)
2- HV-1918-03 Rear Lights Moduponent®(52926)
1- HV-1918-08 5-Clearance Lights Kit (52928)
2- HV-1918-12A Set of 89 jumper leads (52557)
1- Stand with lockable storage box (52438)
2- 12VDC Power Supply (52439)
1- MP-1918-01 Master Moduponent™
1- MP-1918-02 CAN Bus Moduponent™
1- MP-1918-13 Network cable

Dimensions: 32” (80 cm) W x 56” (140 cm) L x 76” (190 cm) H Weight: 325 lb (148 kg)

    Subscribe to the IES Quarterly Digest
    Want to stay up to date on the latest products and trends? Subscribe to the IES Quarterly Digest.

    Contact Us

    Leading The Future of Teaching Tech™
    + 1 (512) 677-8608


    Connect with Us

    Let us partner with you to build premier automotive, diesel, and fluid power programs.

    Request Quote